Universal Rubber Paint Farbex - Durable Coating for Any Surface - Green

€22,00

Universal Rubber Paint Farbex is the perfect solution for protective and decorative coatings on metal, wood, and mineral surfaces. Suitable for both indoor and outdoor use, it provides high elasticity,excellent adhesion, and resistance to cracks and wear. Ideal for roofs, facades, fences, and more, this waterproof paint ensures long-lasting protection against weather elements.Easy to apply with a brush, roller, or spray gun, Farbex guarantees a durable and uniform finish.

Größe: 1.2 Kg (6-12m²)

1.2 Kg (6-12m²)
3.5 Kg (17-35m²)
6 Kg (30-60m²)
Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:€30,99
Description

Universal “rubber” paint is designed for protective and decorative coating of metal, mineral, and wooden surfaces, as well as surfaces previously painted with alkyd and oil paints, both indoors and outdoors.

Rubber paint Farbex is suitable for painting roofs, building facades, plinths, metal gutters, brick and stone-masonry, columns, fences, residential and healthcare spaces, corridors, bathroom walls, kitchens, restaurants, playgrounds, sports areas, commercial halls, etc.

Properties of Rubber Paint

  • High elasticity
  • Good adhesion to all surfaces
  • Crack resistance
  • High wear resistance
  • Waterproof
  • Increased weather resistance
  • UV resistant
  • Easy to apply

Consumption (100-200 g/m²)

  • 1.2 kg bucket covers about 6-12 m²
  • 3.5 kg bucket covers about 15-35 m²
  • 6 kg bucket covers about 30-60 m²

Materials on which rubber paint can be applied:

  • Roof tiles, cladding
  • Galvanized steel, aluminum
  • Primed iron and metal
  • Concrete, plaster, sealants
  • Brick, concrete
  • Drywall
  • Plywood, fiberboard, chipboard, DSP
  • Wood
  • Wallpaper
  • Alkyd and oil paints

Surface Preparation:

The surface must be clean, dry, and degreased, thoroughly cleaned of dust, dirt, rust, oils, grease, peeling paint. When used on metal, we recommend first treating the area with an anti-corrosion primer.

Application of Rubber Paint:

Thoroughly mix the paint container to achieve a uniform consistency. The paint is applied with a brush, roller, or spray gun to the prepared surface.

Mix the paint thoroughly before application. Apply the paint at an air and surface temperature from +10 ºС to +30 ºС and a maximum relative air humidity of 80%. After completing the preparation, you can start applying the coating.

Apply the paint in 2-3 layers. The first layer is the base. After the first layer, check that the surface does not contain any untreated areas, edges, and corners. All hard-to-reach areas need to be thoroughly covered. Each subsequent layer is applied only after the previous layer has completely dried (about 2 hours). The final layer allows for a uniform surface and improves its protective properties.

Do not apply paint in direct sunlight, strong wind, frost, or rain. The resulting surface should not come into contact with rain and temperatures below freezing for the next 8 hours after application.

After Application:

Clean tools and equipment with water, solvent or special cleaner. Store in a dry and cool place at a temperature from +5°C to +35°C.

Warning:

Do not inhale fumes and ensure that the area where you apply the paint is well-ventilated.


FAQ

1. What surfaces is this paint suitable for?
2. Where can this paint be applied?
3. How long does the coating last?
4. Can the Universal Rubber Paint be thinned?
5. How should the paint be applied?
6. What is the drying time?
7. Is the dried coating washable?
8. How many coats are typically needed?
9. Do I need to prime surfaces before applying this paint?
10. At what temperatures can this be applied?
11. How do I tint/color this paint?
12. What is the coverage rate per coat?
13. Is it moisture/vapor permeable?
14. How water resistant is it?
15. How can I clean application tools after use?
16. How long until full hardness/resistance is achieved?

Rubber Paint articles